328 Piece Tool Chest Set
7 Piece drawers
Overall size: 765 x 465 x 812 mm
Overall with casters size: 765 x 465 x 976 mm
Casters size: 5″ x 2″
Thickness of Cabinet: 0.8 – 1.0 mm
Thickness of drawer: 0.7 mm
5 Piece 536 x 410 x 74.5 mm drawer
2 Piece 536 x 410 x 153.5 mm drawer
5 Piece iron hooks (for hanger tools)
Draw 1
– 1x Ratchet wrench: 1/4″
– 13x 1/4″ sockets: 4, 4.5, 5 ,5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14
– 8x 1/4″ DR 50 mm (L) Deep socket: 6, 7, 8, 9, 10, 11, 12, 13 mm
– 6x 1/4″ star socket: E4, E5, E6, E7, E8, E10
– 24x 1/4″ x 32 (L) bits Socket:
· Hex: 3, 4, 5, 6, 7, 8, 10mm
· Star: T8, T10, T15, T20, T25, T27, T30, T40
· SL: 4, 5.5, 7 mm, PH1, PH2, PH3, PZ1, PZ2, PZ3
– 2x Extension bar: 1/4″Dr. x 50 mm, 1/4″Dr. x 100 mm
– 1x Extension flexible bar: 1/4″ x 150 mm
– 1x 1/4″ Universal joint
– 1x Sliding “T” Bar: 1/4″ x 114 mm
– 1x 1/4″ three way adaptor: 3/8″ (F) x 1/4″ (M)
– 1x Ratchet wrench: 3/8″
– 13x 3/8″ hexagonal socket: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24 mm
– 9x 3/8″ deep hexagonal socket: 10,11,12,13,14,15,16,17,19mm
– 7x 3/8″ star socket: E10, E11, E12, E14, E16, E18, E20
– 2x 3/8″ extension bar: 75 mm (3″), 150 mm (6″)
– 1x Dr. Universal joint: 3/8″
– 1x 3/8″ three way adaptor: 3/8″ (F) x 3/8 (M)
– 1x Ratchet wrench: 1/2″
– 1x 1/2″Universal joint
– 19x 1/2″DR Socket: 8,10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 27, 30, 32 mm
– 4x 1/2″ DR 77 mm (L) Deep socket: 14, 15, 17, 19 mm
– 8x 1/2″ Star Socket: E10, 12, 14, 16, 18, 20, 22, 24
– 2x Spark plug socket: 1/2″ Dr.16 mm, 21 mm
– 1x 1/2″ x 250 mm Sliding T bar
– 2x Extension bar: 1/2″ Dr. x 100 mm, 1/2″Dr. x 250 mm
– 1x 1/2″ three way adaptor: 3/8″ (F) x 1/2 (M)
Draw 2
– 1x Spinner handle:1/4″ x 150 mm
– 1x bit holder: 1/4″ x 6.35 mm
– 40x 6.35 x 25 mm (L) bits:
· T5, T6, T7, T8, T9, T10, T15, T20, T25, T30
· PH1, PH2, PH2, PH3, PH4
· PZ1, PZ2, PZ2, PZ3, PZ4
· SL3, SL3, SL4, SL4, SL5, SL5.5, SL6, SL6.5, SL7, SL7
· H2, H3, H3, H4, H4, H5, H5, H6, H7, H7
– 1x Magnetic shank: 6.35 mm x 100 mm
– 3x 1/2″ x 58 mm (L) bits socket: T55, T60, T70
– 32x 8 x 30 mm (L) bits:
· PH3, PH4
· PZ3, PZ4
· H7, H8, H10, H12, H14
· SL, SL6, SL6.5, SL8
· T20, T25, T27, T30, T35, T40, T45, T50, T55
· T27H, T30H, T35H, T40H, T45H, T50H
· M5, M6, M8, M10
– 1x bit holder: 1/2″ x 8 mm
– 14x screwdriver: SL3 x 75, SL4 x 100, SL5.5 x 100, SL6.5 x 38, SL6.5 x 125, SL6.5 x 150, SL8 x 200, PH0 x 75, PH1 x 75, PH1 x 100, PH2 x 38, PH2 x 125, PH2 x 150, PH3 x 200
– 9x Hex Key Wrench: 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10
– 9x Trox Key Wrench: T10, T15, T20, T25, T27, T30, T40, T45, T50
Draw 3
– 17x Combination spanner: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24
– 5x Flare nut Spanner: 8 x 10, 10 x 12, 11 x 13, 12 x 14, 17 x 19
– 5x Double flexible socket wrench: 8 x 9, 10 x 11, 12 x 13, 14 x 15, 17 x 19
Draw 4
– 1x 40 mm Rubber and plastic hammer
– 1x 10″ Water pump pliers
– 1x 8″ high leverage long nose pliers
– 1x 8″ high leverage bent nose pliers
– 1x 8″ high leverage combination pliers
– 1x 7″ high leverage diagonal cutting pliers
– 4x circlip pliers
– 1x 300g Machinist Hammer
– 5x steel file set: Flat, Half round, Round, Triangle, and Square.
Draw 5
– 12x Offset ring spanner: 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22, 21 x 23, 24 x 27, 25 x 28, 30 x 32
– 1x 10″ Curved jaw lock wrench
– 1x 10″Adjustable wrench
– 3x Cold chisel: 10 x 142 mm, 13 x 152 mm, 16 x 172 mm
– 6x Pin punch: 1.5 x 152 mm, 3 x 152 mm, 4 x 152 mm, 5 x 152 mm, 6 x 152 mm, 8 x 152 mm
– 1x Taper punch: 2 x 140 mm (3/32″ x 5 – 1/2″)
– 2x Centre punch: 6 x 102 mm (1/14″ x 4″) 8 x 115 mm (5/16″ x 4 – 1/2″)
Draw 6
– 8x T-handle hex wrench: 2 x 100 mm, 2.5 x 100 mm, 3 x 100 mm, 4 x 150 mm, 5 x 150 mm, 6 x 150 mm, 8 x 200 mm, 10 x 200 mm
– 8x T-handle Torx wrench: T10 x 100 mm, T15 x 100 mm, T20 x 100 mm, T25 x 150 mm, T30 x 150 mm, T40 x 150 mm, T45 x 200 mm, T50 x 200 mm
– 1 Piece Hacksaw frame
Reviews
There are no reviews yet.